Evaluation & DS_RVision - DAISCH
Engineering Enablement

Quick Evaluation
Without Custom Code

The fastest path from unboxing to data analysis. Connect via USB and visualize calibrated sensor data instantly with DS_RVision.

Plug-and-Play

Skip the breadboard. Use our Evaluation Suites with integrated USB-to-UART interfaces to connect directly to your Windows PC.

Connection: COM3 (115200)

Real-Time Plotting

Visualize 6-DOF data and fused Attitude (Roll/Pitch/Yaw) waveforms dynamically to verify sensor responsiveness.

Plot: 100Hz Update

Easy Configuration

Modify output frequency, and bandwidth through a simple GUI. No register-level coding required.

Status: Configured

One Tool, Entire Ecosystem

DS_RVision natively supports the full range of DAISCH motion sensors and navigation systems.

Inertial Modules

  • IM8 Series High-Perf
  • IM3 Series Industrial
  • IM7 Series Cost-Eff

Intelligent Suites

  • IM8-Suite Embedded DSX
  • IM3-Suite Embedded DSX
Unified Protocol All inertial modules and intelligent suites utilize the standard DAISCH SPI/UART communication protocol.

Typical Evaluation Workflow

From unboxing to validated data in less than 15 minutes.

STEP 01

Connect & Auto-Detect

No manual driver installation required. Connect the Evaluation Suite to your PC via the included USB-C cable. DS_RVision automatically scans COM ports and identifies the connected sensor model.

  • Automatic Baud Rate Detection
  • Hot-Plug Support
DS_RVision - Connection Manager
Connection UI
Status Connected
STEP 02

Configure Parameters

Adapt the sensor to your application environment. Output range and frequency (up to 500Hz), configure the low-pass filter bandwidth.

  • Output Range
  • Output Frequency
  • Vibration Filter Tuning
DS_RVision - Configuration
Configuration UI
STEP 03

Visualize & Log Data

View real-time waveforms for Pitch, Roll, Yaw, and 3-axis Acceleration and Angular rate. Record test runs with a single click and export to CSV/Excel for deeper analysis in MATLAB or Python.

  • Real-time 3D Attitude View
  • One-Click CSV Export
DS_RVision - Log Data Output
Recording 00:14:23

DS_RVision Data Visualization

DS_RVision Configuration Demonstration

Toolchain FAQ

Setup & Analysis

Common questions about connecting, configuring, and analyzing data with DAISCH tools.

DS_RVision is a native Windows application (Windows 10/11) designed for visual evaluation and parameter configuration.

For Linux or Ubuntu environments (common in Robotics/ROS), we provide open-source C++ drivers and ROS nodes instead of a GUI tool. Please check our "Drivers & SDKs" page for Linux support.
Our Evaluation Kits use standard CP210x USB-to-UART bridges. In most Windows 10/11 systems, the drivers are installed automatically via Windows Update.
If your PC does not recognize the device, you can download the standard Virtual COM Port (VCP) drivers from the chip manufacturer's website.
Yes. DS_RVision records data in standard CSV (Comma Separated Values) format. The log files include timestamps, acceleration/gyro data, and fused Euler angles, which can be directly imported into MATLAB `readtable()` or Python `pandas.read_csv()` for offline analysis.
Yes. When you click "Write to Flash" in DS_RVision, the parameters (such as baud rate, output frequency) are saved to the sensor's non-volatile memory and will persist after a reboot.
The default factory baud rate is typically 115200 bps depending on the model (check your datasheet). DS_RVision includes an "Auto-Scan" feature that attempts to cycle through common baud rates to find your device automatically.
Yes. You can open multiple instances of DS_RVision software. Each instance can bind to a different COM port, allowing you to visualize and log data from multiple sensors simultaneously for comparison testing.
Yes. DS_RVision is a free utility tool provided for all DAISCH customers. You can download the latest version from this page without any license key or subscription fee.

Ready to Validate Performance?

Get the full evaluation package: The plug-and-play hardware suite plus our powerful DS_RVision software.

Request Eval Kit Download Software