Development Suites - DAISCH
Acceleration Toolkit

From Evaluation to Design-in

We don't expect you to figure it out alone.
DAISCH provides the complete blueprint—hardware, schematics, and software—to guide you from first power-up to mass production.

Rapid Prototyping

Evaluation boards with standard USB, CAN, and UART interfaces. Connect to your PC or MCU in minutes, not days.

Hardware Ready

Reference Designs

Don't reinvent the wheel. Access our production-proven schematics, PCB layouts, and BOM lists for your carrier board.

Open Resources

Software Stack

From DS_RVision for Windows to ROS drivers for Linux. We provide the code you need to visualize and integrate data.

Full SDK Support

What's Included

Everything you need to evaluate performance and start integration immediately.

Evaluation Kit
  • 1x DAISCH IMU/INS Sensor
  • 1x wiring harness
  • 1x Evaluation Board
Software Suite
  • DS_RVision (Win/Linux GUI)
  • ROS 1 & 2 Drivers (C++)
  • Python Analysis SDK
Documentation
  • Detailed Datasheet (PDF)
  • Communication Protocol Spec
  • Mechanical Drawing (STEP)
  • Integration Guide

Reference Schematics & Layouts

Accelerate your carrier board design. Download field-proven hardware files to ensure signal integrity and power stability.

Schematics (SCH)

Complete reference circuit diagram including power filtering, decoupling capacitors, and UART/CAN transceiver recommendations.

Altium (.SchDoc) PDF OrCAD
PCB Layout

Recommended board layout guidelines. Includes differential pair routing, ground plane partitioning, and connector footprint.

Gerber .PcbDoc STEP (3D)

Supported Products

One kit, universal compatibility. The evaluation board supports our entire inertial lineup via a unified 6-pin interface.

IM Series (IMU)

6-DOF Tactical Grade Inertial Measurement Units.

VG/AH Series

Vertical Gyros & AHRS with fusion algorithms.

Engineering Note: Same series share the same mechanical mounting holes and electrical pinout for easy swapping.

Typical Development Path

A streamlined workflow designed to get you from unboxing to finalized product in under 4 weeks.

Week 1
01

PC Evaluation

Connect via USB. Use DS_RVision to visualize raw data, check noise density, and log Allan Variance.

Week 2
02

Driver Integration

Port the C SDK to your MCU (STM32/ESP32) or install the ROS Node on your Jetson/IPC.

Week 3
03

System Tuning

Mount on vehicle. Configure installation angles, hard/soft iron calibration, and data output rates.

Week 4
04

Design-In

Import our Reference Schematics into your carrier board design and prepare for SMT production.

Kit Support

Development FAQ

Common questions about hardware compatibility, software tools, and design-in resources.

Yes. The evaluation board breaks out the UART/TTL pins via standard 2.54mm headers. You can bypass the USB interface and wire it directly to your STM32, ESP32, or Arduino TX/RX pins.
Our main GUI tool (DS_RVision) is Windows-based. However, our Python SDK and ROS drivers are cross-platform and work perfectly on MacOS (Intel/Silicon) and Linux.
Yes. The power voltage depends on different modules and refer to the datasheet.
Yes. We provide detailed STEP files that include the internal PCB structure and thermal pad locations, allowing you to run accurate thermal analysis in SolidWorks or Ansys.
Yes. The DS_RVision software includes a firmware update tool. We release periodic updates to improve Kalman filter performance and add new protocol features.
We maintain stock of evaluation kits for all major series. Orders are usually shipped in 2-3 days. For mass production quantities (>100 units), standard lead time is 2-4 weeks.
Yes. Once you have integrated our sensor into your carrier board design, you can send your schematic and layout (Gerber) to our support team. We will review the power and signal lines to ensure optimal performance, free of charge.
Yes. The evaluation board includes a CAN transceiver. You can connect a CAN analyzer (like PEAK or Kvaser) to the H/L screw terminals to monitor data or send configuration commands.

Start Your Design Today

Order stock evaluation kit and shipping in 2-3 days.
All schematic files and SDKs are available for immediate download.

Request Dev Kit Download Resources